

Tanami Pump - Metal - Jerry Can Transfer Pump - Yellow - Diesel - TP-01-Y
Suits use with Diesel Fuels
For use with 'Metal' Jerry Cans
No moving parts
Runs with 12 V air compressor, foot or hand pump
Powdercoated body resists corrosion. Red or Yellow
Empties a 20 litre Jerry Can in minutes
Tested with Petrol using 72 LPM 12v "Max Volume" air compressor
Powder Coated to resist corrosion
Specifications:
No internal moving parts
Operates with air pressure as low as 2-5 psi
Air inlet : Schrader Valve
Safety : Pressure relief valve
Outlet : 10 mm pipe with 1.5m fuel grade hose
For low pressure/volume 12 volt air pumps
Not to be used with 240 volt high capacity air pumps
Includes:
Tanami Pro Pump Body
Pressure Relief Valve
Hose Clamp
1.8m Fuel Grade "Clear" Hose
Operating & Safety Instructions
Registerd Design No. 200911988
(TP-01-Y)
SKU | TP-01-Y |
Brand | TANAMI |
Shipping Weight | 1.2000kg |
Shipping Width | 0.110m |
Shipping Height | 0.150m |
Shipping Length | 0.670m |
Shipping Cubic | 0.011055000m3 |
Unit Of Measure | ea |
Assembled Length | 0.550m |
Assembled Height | 0.050m |
Assembled Width | 0.050m |
Best thing every
By: Paul Wiener on 3 December 2018This best thing that every bought makes live easier went transferring fuel from jerrycan to your fuel tank in your vehicle.
(5)
great piece of gear
By: Stewart Davies on 26 October 2017I have just recently driven around the north west towing a caravan and had to refuel my 4wd twice from a jerry can and found it very very dificult with my wife holding a funel and it became messy with a few spills. I knew there had to be a beter way, and there is! This product works well and Ill never travel without it again
(5)