4WD - MITS TRITON ML MN - TAIL SHAFT SPACER 13.25mm

TRITON ML MN 06 on - TAIL SHAFT SPACER 13.25mm

If your Manual ML/MN Triton (06-on) is suffering from significant driveline vibration following a suspension lift?  This is most likely due to the fact that the Manual ML/MN Triton has a two piece drive shaft with centre bearing.
The suspension lift will have changed the sensitive angles the tailshaft runs on, causing a driveline vibration.
 
This is not the case in the Auto ML Triton, with the same lift, as the Auto versions have a single piece drive shaft.
 
These tailshaft spacers have the following features...
Machined lip to locate the spacer to the flange
E-coated black for durabilty & discreet fitment
Laser cut precision for accurate fitment
 
It is also reccommended to fit spring wedges to the rear of your vehicle if fitting raised suspension, this will change the pinion angle back to factory specifications assisting in reduced driveline vibrations and premature Uni wear.