4WD - FORD/MAZ RANGER PX/BT50 GEN 2 SERIES 1 & 2 10/2011-ON FRONT DIFF DROP KIT

FORD RANGER PX Mk1 & Mk2 models / EVEREST / MAZDA BT50 2012+ FRONT DIFF DROP KIT V2

Diff Drop Kits allow for correction of your CVs in IFS vehicles when lifting 2-3 inches above standard. 

Suitable for fitment —
Ford Ranger PX Mk1 & Mk2 models
Mazda BT50 2012+
Ford Everest—all models

This kit will lower diff by 26mm and mov-ing diff forward 20mm thus reducing the angles CV Joints need to operate on and increasing clearances.

Kit Contents—
1 X RHR Fabricated diff mount (1 piece)
1 x Tapered diff spacer
1 x Tailshaft spacer
1 x LHF diff mount bracket (2 piece)
1 x 10mm ID machined spacer
1 x 12mm ID machined Spacer
2 x M10 x 1.5P x 110mm long zinc bolts—HT 8.8
8 x M12 Flat washers—Zinc
4 x M10 x 1.5p Flange nuts
6 x M8 x 1.0 x 80mm cap head bolt—HT 12.9
1 x M10 x 1.5P x 40mm long dome head bolt—Zinc
2 x M10 x 1.5P x 35mm Cap head bolt—HT 12.9
2 x M12 x 1.75P x 30mm—HT 12.9