Charge Plus Battery Protector - CPBP

$99.00
In Stock
Usually ships within 1 day

Make 4 payments of $24.75 over 8 weeks and get it now!



Calculate Shipping

Charge plus’s Battery Protector is designed as a Low battery cut-out switch with build in over-current protection circuit, both crucial features to protect your expensive batteries from over discharging and or a short circuit.

Charge Plus Battery Protector - CPBP

Charge plus’s Battery Protector is designed as a Low battery cut-out switch with build in over-current protection circuit, both crucial features to protect your expensive batteries from over discharging and or a short circuit.

Compared to the other Low battery cut-outs the Charge Plus unit has the additional function of a 15 amp circuitbreaker. The Charge Plus unit is small in size (58mm L x 40mm W x 26mm H) so they can be stacked together to
make a fuse box.

Charge plus’s Battery Protector has the following general functions:
1. The unit is designed to be configured as either automatic resetting or manual resetting.
2. The unit will trip out to protect the battery if the battery voltage falls below 10V for a period of time.
3. The unit will trip out if the load current exceeds 15 amps.
4. There is a push button which is used to reset the unit when it trips out or it can be used to switch off the circuit.
5. The unit is fitted with a LED to indicate the current load on the output and status.

The Charge plus Battery Protector is designed using Nanowatt technology and clever software that flashes the LED, has a no load standby power consumption of less than 2mA in auto mode or less than 1mA in manual mode.

Even at higher power outputs of more than 1 amp the consumption is a maximum of 15mA. Other units in the market which are only low voltage cut-outs are around 50mA even at no load.

The charge Plus unit is truly Automotive Load Dump and Voltage rated to O.E. standards and have an operating voltage range to suit 12 volt vehicles ( 9 volts to 20 volts )


Features

The Charge plus Battery Protection Module can be configured as Manual Reset or Automatic Reset, these modes of operation are explained below.

1. Manual Reset Mode:

a. Once power is applied to activate the output press and hold the Reset Button for about 1 second. The LED will light and indicate the load on the unit as per Table below.

b. Pressing the Reset Button when the Output is active will turn off the Unit, so the Unit can be used as an On/Off switch for your circuit.

c. The unit monitors the load current as well as the battery Voltage if the load current exceeds 15Amps the unit will disconnect the load and require you to press the Reset button to reactivate.

d. If the Battery Voltage drops below 10V for a period of time the unit will disconnect the load and require you to press the Reset button to reactivate. Averaging is used to filter momentary drops in voltage caused by large loads being turned on.

 

2. Automatic Reset Mode:

a. Once power is applied to activate the output press and hold the Reset Button for about 1 second. The LED will light and indicate the load on the unit as per Table above.

b. Pressing the Reset Button when the Output is active will turn off the Unit, so the Unit can be used as an On/Off switch for your circuit.

c. The unit monitors the load current as well as the battery Voltage if the load current exceeds 15Amps the unit will disconnect the load. It will Check every 2.5 seconds to see if the overload has been removed and
it if the Load is less than 15 Amps it will Reactivate the output.

d. If the Battery Voltage drops below 10V for a period of time the unit will disconnect the load and once the battery voltage returns to 13.2 Volts (battery is charging) the unit will Reactivate the output. Averaging is used to filter momentary drops in voltage caused by large loads being turned on.

(CPBP)

SKU CPBP
Barcode # CHDCDC40
Brand Charge Plus
Shipping Weight 0.7000kg
Shipping Width 15cm
Shipping Height 10cm
Shipping Length 18cm
Shipping Cubic 0.002700m3
Unit Of Measure ea
Assembled Length 12cm
Assembled Height 5cm
Assembled Width 10cm

2 Years

Be The First To Review This Product!

Help other RV4x4 users shop smarter by writing reviews for products you have purchased.

Write a product review


We Also Recommend



Others Also Bought



More From This Category