Ford RANGER GEN2 2011 on / Mazda BT50 - 50mm Extended Anti Inversion Shackles - Pair
FORD RANGER 2ND GENERATION 2011 ON
MAZDA BT-50 2ND GENERATION 2011 ON
These shackles are manufactured 50mm longer than a standard OEM shackle, the increased length will offer 25mm of increased height when fitted,
Extended shackles can also take the stiffness out of the ride by increasing the arc of travel in relation to the spring.
Zinc coated for long lasting
Accepts original bushings
Grease nipple protection
Grease holes opposite to allow grease full coverage of pin (not localised grease leading to dry bush failure)
Sold as a pair
High tensile bolts & pins used
It is reccommended to fit spring wedges to the rear of your vehicle if lifting over 40mm, this will change the pinion angle back
to factory specifications resulting in reduced driveline vibrations and premature Uni wear.
Extended shackles are designed to be used for offroad use only, you will need to check with your local transport authority if these are legal for fitment in your state.
|Unit Of Measure||ea|
Be The First To Review This Product!
Help other RV4x4 PTY LTD users shop smarter by writing reviews for products you have purchased.