Dynamica Ground Grabber 2 Anchor  - Rated at 3.5  tonne - GG2

$680.00
RRP $686.00
SAVE $6.00 (1%)
In Stock
Usually ships within 1 day


Calculate Shipping

Ground Grabber is a strong and effective ground anchor for four wheel drive vehicle recovery.

Dynamica Ground Grabber 2 Anchor  - Rated at 3.5  tonne

Rated at 3.5 tonnes and measures 121cm long. Weighs 11 Kgs.

Ground Grabber is a strong and effective ground anchor for four wheel drive vehicle recovery.

It provides a winching point where no natural anchor point exists and is easy to use, as it requires minimum preparation.

Ground Grabber is constructed from high tensile steel with a folding share plate for easier transport.

Available in 5 tonne rating and a slightly shorter and lighter version rated at 3.5 tonne.

 

GROUND GRABBER®

Ground Grabber® is a strong and effective self-recovery ground anchor for four-wheel drive vehicle recovery. It provides a winching point where no natural anchor point exists and is easy to use, as it requires minimum preparation.

Ground Grabber® mast is constructed from high strength box section steel and share plate from 350 grade steel which has a rating of five tonnes or 3.5 tonnes depending on the model.

Preparation:

1. Rotate the ground-piercing blade 90 degrees from storage transport position to action position and lock the blade using the eye nut. The nut needs to be very tight, we suggest using a tyre lever.

2. Connect a rope to the eye nut for retrieval after vehicle recovery.

3. Attach the winch rope/cable to the steel loop at the end of the mast and holding the Ground Grabber® thrust and engage the ground piercing blade into the ground.

4. Engage the winch; the Ground Grabber® will dive into the ground. When firmly positioned engage low range 1st gear and winch.

Note:
In the event that ground penetration is not achieved repeating the process in the same location as previously used will assist Ground Grabber® as a deeper and more effective furrow will be created to gain a better footing.

When winching over a hill / dune Ground Grabber® should be positioned as far as possible beyond the crest to allow the vehicle to winch over the top of the rise without stopping. 

 

Ground Grabber retrieval:

1. Disconnect winch rope/cable from Ground Grabber®
2. Drive vehicle straddling Ground Grabber®.
3. Attach retrieval rope to tow bar.
4. Drive forward slowly so the anchor is removed the opposite way to which it went in.

Note:
In soft sand attach a rope to the eye nut that is at least 4- 5 metres long as the diving action of the anchor may require a longer than usual rope to ensure easy retrieval once vehicle has been recovered.

Ground Self Recovery Anchor 3.5 & 5 tonne maximum working load models available

(GG2)

SKU GG2
Brand Dynamica
Shipping Weight 11.0000kg
Shipping Width 0.300m
Shipping Height 0.300m
Shipping Length 1.400m
Shipping Cubic 0.126000000m3
Unit Of Measure ea
Assembled Length 1.200m
Assembled Height 0.300m
Assembled Width 0.450m

Be The First To Review This Product!

Help other RV4x4 PTY LTD users shop smarter by writing reviews for products you have purchased.

Write a product review


Others Also Bought


Handbrake Attachment (V3/V3Plus/DO45PLUS) NO BASE
4% OFF RRP $75.00

More From This Category


Dynamica Ground Grabber 2 Anchor  - Rated at 3.5  tonne - GG2
1% OFF RRP $686.00
Dynamica Ground Grabber Anchor  - Rated at 5 tonne - GG
3% OFF RRP $720.00
RV4x4 Hawse Fairlead - Polished Aluminium Suits Warn Ironman Tigerz ARB TJM
20% OFF RRP $83.00